May 15, 2009

Dog Fencing (5/14/09)

As many of you are well aware, my dogs are completely out of control and are total psychos. For awhile, we have talked about letting them run free in our backyard to run off some energy. But, since they love to run through my plants and also eat my plants, its was pretty much out of the question. We talked about fencing in part of the backyard to keep them away, but I didn’t want to spend the money when we could just chain them up out front.

However, after multiple incidents of the dogs getting free, we decided it was time to set up the fencing. They have managed to pull the stake completely out of the ground, Lizzie somehow got her chain completely detached and was running down the street, and finally this weekend, Lizzie snapped the chain, which is rated to 100 lbs!

Thankfully, there were several rolls of fencing and chicken wire left over in the top of our garage from the previous owners. We just had to buy some posts and a way to fasten it to the existing fence, but that stuff was easy to find at Home Depot.

Well since the dogs have no concept of boundaries, I was not convinced that the chicken wire would keep them out of my vegetable garden. So, I figured the only way to keep them out was to electrify it. Yes its mean, but it was the only way I could ensure my vegetable stay safe. I don’t have much experience with electrical work, but it wasn’t hard to splice and run some wires from the garage.

As you can see from the picture below, Savannah tested the fencing and met her match. She ended up twitching on the lawn for about 5 minutes until she recovered.



Haha...in all seriousness, she just found a spot on the yard that smelled good and ended up rolling around and scenting herself for 5 minutes. I really didn't electrify the fence, that would just be cruel! I just happened to take the picture at the perfect time and realized after I took it that I could make up a fun story :). After she rolled around there, Lizzie decided that she needed to roll around in the same spot too.

Hopefully, the fencing keeps them out and my plants stay safe.

April 30, 2009

Vacation (4/30/09)



Wow, its been awhile since I have posted here. Life has been busy and this blog has been about the last thing I think of at the end of the day.

One of the things that has kept me from posting was our vacation last week in the Dominican Republic! Above is a picture of part of the pool at the resort we stayed at, the Majestic Colonial. Everything was perfect on our trip. All of the flights were early, the weather was perfect, the food was great and plentiful, and the drinks were free flowing. We had some much fun there over the 4 days and we are all still recovering from the sunburn. Apparently SPF 30 is not strong enough....

April 1, 2009

Butterfly Garden (4/1/09)



Here is the new butterfly/hummingbird garden that I put in. I ripped up all of the shrubs and other plants that were in the bed right infront of the bay window in our living room.

Not all of the plants have been planted yet as some are still growing in my seed started and I still have one waiting to ship. Hopefully by the end of this year, if not next year, the bed will be nice and fully grown and we will have lots of butterflys and hummingbirds around.


Posted by ShoZu

March 29, 2009

Seeds (3/21/09)




I know, I have been a bit behind on my posts again... I have been busy the past couple weeks and usually forget to update.

Here are my seeds from a week ago. The ones you can see growing are the ones that I planted almost a month ago. They are all growing very nicely. I spent about 30 minutes planting the rest of my seeds and in a couple months I will have lots of plants, 120 to be exact!

Since taking this picture, most of the rest of the seeds have sprouted and they are all growing quite nicely. I'll give a couple more updates as they are growing to show the progress


Posted by ShoZu

March 18, 2009

Hooray Beer! (3/17/09)


Not much to say today except my Irish Red Ale is finally ready. Its a good beer, but could use some improvements. But for my first brew, its pretty damn good. I would give it a "B". It needs a little bit more malty flavor and less carbonation. However, maybe with a little aging, the flavors will improve. It's recommended to age it for at least 3 weeks in the bottle for best flavor. Its actually only been 2 weeks, but the beer is drinkable because its done carbonating at 10 days.

I'll try and let it age for another week before I drink anymore. Hopefully I can hold out and not drink the rest of it by then. It may be a challenge to drink 35 more beers in the next week, but hey, ya never know.....=)



Posted by ShoZu

March 15, 2009

Hefeweizen Partial Mash (3/14/09)

Today I brewed up my second batch of beer. I decided that I would brew my favorite style, a hefeweizen.  It is a German wheat beer and they are very hard to find.  I hope this one comes out well, because I will be brewing this one a lot.
 
 
The recipe I came up with is:

 
4 lbs wheat dry malt extract
2 lbs American wheat malt
2 lbs Belgian pilsner malt
1 oz Hallertau hop pellets (3.9% alpha acid)
Wyeast Bavarian Wheat yeast
1 tsp Irish Moss



I am doing a partial mash brew and the purpose is to extract sugars and other fermentables from the grains first. Its better than brewing with just the extract as you have more control over whats in your beer and you can impart some fresher ingredients.

If you are doing an extract boil, you can steep some specialty grains first, but these are limited and don't add much to the wort (unfermented beer) besides some color and flavor.

The first step is in a partial mash brew is to mash the grains. This is done by by heating some water (1.5qts/lb grain) to about 165 degrees, adding the grains to the water, and then holding the water between 150-155 for an hour. For my equipment, I lose about 10 degrees in the water by adding the grains so I shoot for around 165 and then add the grains and turn the heat down to maintain the temperature from there.

Of course while I am brewing, I have to be drinking some other beer. Today happened to be an Irish Stout that I brewed a couple years ago with my brother. Its not an everyday beer so it has lasted me quite a long time. Over the past 2 years, it has aged nicely. Too bad I only have a few more left....

While the grains are mashing in my brew pot, I bring another pot of water to 170 degrees and hold it there. This water is used to sparge the grains. Sparging is used to rinse the grains after they have been mashed to rinse some more sugar off of them. This is not a necessary step, but it improves the efficiency of your extraction, meaning more fermentables, and having to use less extract. (If you look closely at the left of the photo, you can see the remnants of the beer from above.

I use 2.25 gallons of water for the sparge. After some evaporation and a lot of the water being absorbed by the grains, I end up with right around 3.35 gallons from the mash and sparge. This is a good volume for my brew pot. Because my brew pot is only 5 gallons, I need to have some working room once it gets boiling to prevent boil overs.

After this is done, the brew pot is moved outside to my 185,000 BTU propane burner. Yes, this thing puts out some serious heat! It sounds like a jet engine when its at full blast. I kept the valve open only about half way open for the whole brew...

After the wort is brought to a boil, the heat is shut off and I add 1 of the 4 lbs of the dry malt extract. I could add all of the extract now, but by adding most of the extract late in the boil, it helps to keep the beer light in color. A hefeweizen is meant to be a yellow to golden color. If the extract is brewed too long, it can caramelize and make the beer darker than is should.

Even when doing a late extract boil, you need to add some of the extract at the beginning (generally 15%-25% of the total extract). You need to have have some extract in the brew to have sugars to get enough utilization(bitterness) out of your hops. Thankfully the homebrew recipe program I use, calculates the bitterness of the hops when doing a late extract boil and I can make sure I have the appropriate bitterness for the beer.

After adding the 1 lb of extract, the wort is brought back to a boil, the hops are added, and then its boiled for 60 minutes.

While the wort is boiling for an hour, I sit back, enjoy another Irish Stout, and listen to some tunes....

When there is 15 minutes left in the boil, the remaining 3 lbs of extract, the irish moss, and my wort chiller are added to the pot.

The irish moss is added to help clarify the beer. When the wort is fermenting, the yeast and proteins will clump together and fall to the bottom of the fermenter. This is called flocculation. The irish moss aids in the yeast and proteins falling out of the fermenting beer as the irish moss is negatively charged and the yeast/protein is positively charged. They attract, and the weight of the particles help them fall to the bottom.

The wort chiller is boiled for 15 minutes to sanitize it. During the whole brewing process sanitation is very, very important. Because the wort is a warm, sugary solution it is very susceptible to contamination. The wort chiller is used later, but by boiling it now, there are no risks of any sanitation problems.

After the last 15 minutes of the boil are over, its time to chill the wort. There are numerous reasons why it is important to chill it as fast as possible, but I wont get into those here. I made this chiller myself. Its a length of flexible cooper coil, some tubing, and a garden hose adapter on it. The goal of the chiller is to run the water through as slowly as possible. That way, the heat from the wort transfers to the cold water running through the chiller, and comes out of the other end at almost boiling temperatures. I can chill the wort down in about 20-30 minutes with this method.

After the wort is chilled to around 72-75 degrees, its time to pitch it with the yeast and fill the fermenter bucket up with water to bring the total volume up to 5 gallons. The picture on the left is of my yeast starter. It is not necessary to make a yeast starter with the yeast I am using as it is strong enough to ferment 5 gallons with. However, there are a few reasons to make a starter. It gives the yeast a head start and also helps the yeast cells to multiple. That way, there is less lag time for the fermentation to start.

With the last batch of beer I brewed, it took about 2 days until the fermenting was at its peak. I am writing this blog a day after I brewed and the fermentation has been going at a vigorous rate for most of the day today.

With the faster start to the fermentation there is a much lower risk of contamination as the alcohol from the fermentation will kill off any infections.

Also, by using a yeast starter and increasing the number of yeast cells, you get a more complete fermentation. A completer fermentation is necessary to improve the overall quality of the beer and to prevent off-flavors.

Here are the final photos from my brew day. The photo on the left is the wort after everything has been added, the photo below is the bucket with the lid and airlock on it to monitor the fermentation, and the picture on the right is some of the beer in the hydrometer test tube so I can test the gravity. That way I can make sure I brewed it right, make sure it ferments correctly, and then calculate the final alcohol content. The picture came out a bit orange and the actual color is closer to a golden color. It will change and lighten up a bit as it ferments and the sediment settles out.


Obviously I left out some details and a lot of info on the science behind why I did things, It really wasn't important to include everything in this post. Just enough details to show how and what is done and hopefully help out some fellow homebrewers that may hit this page....

March 3, 2009

Beer Bottling Day (3/2/09)


49 Beers! After all of my hard work, I ended up with just over 2 cases of an Irish Red Ale. Now I only have to wait about 10 days for it to carbonate, and then its all done.

I have decided to get away from brewing from a kit to buying all the ingredients seperately. Its basically the difference of buying a cake mix in the store or baking it from scratch. By changing the way I brew, I can brew more styles than are available in the kits and I can have control over what exactly goes into my recipes. I can decide the color, what flavors, how bitter it is, what yeast to use...etc. There are a lot of factors that go into it, but it is a lot more fun than brewing a boring kit where you have no say.

In an effort to increase my reader base, I am going to start posting the recipes I use and my review of it when its finished. Hopefully I will lend some ideas to my fellow extract brewers and get a few more people to check out my blog.

My next recipe is going to be a Hefeweizen. Its a German Wheat beer and its is my style. More on that later.....

February 28, 2009

Birthday (2/28/09)


Today was the lovely Ms Jessica's birthday. It was a fun day. First we spent some time ice skating, then to the auto show, and then we went out to a lovely dinner.

The auto show was a fun time. This was the first car show I had been to and it was a good time. There were some really sweet cars there. I'm not much of a "car guy" and I couldn't tell you what half the things in the engine were, but there were some pretty sweet cars, like the one above. Not like I could afford any of them.....

Posted by ShoZu

February 27, 2009

Tulips (2/27/09)



As posted here back on 10/1/08, I planted a lovely garden with 72 tulip bulbs. Back then it seemed like so far away until spring, and now it feels even longer away. Seriously, is winter ever going to end?? Anyways, the picture about is 2 of the little tulip sprouts that are now sticking above the soil. I dont know why 1 bulb has 2 shoots, but anyways the whole bed looks like this and I can't wait until they all start coming.

It was nice out yesterday and the snow finally melted and I was able to check out my gardens and see how they did through the winter. Thankfully this year, it looks like all of my roses have survived. Last year I lost 3 out of 4 roses! This year I added winter protection to all of my roses and there is still some green on every single one of them.

Hopefully we break this cold soon and everything will spring back to life.




Posted by ShoZu

February 21, 2009

Seeds (2/21/09)




I finally get to use my birthday present from last year, my seed starting kit. It is nice to save a lot of money this year and grow all of my plants from seed.

It is too early in the year to start most annuals, but there are a few annuals that need to be started indoors 12 weeks before planting and most of the perennials take 6-10 weeks to start indoors and most of them can be planted starting in mid-to late April, so now is the perfect time to get them started.

As of today, there are just some seeds sitting in a few of the slots. Most of them wont sprout for a few weeks, but I am planning on taking a picture once a week and putting it up here to track the progress. I am planning on planting 120 plants, but as of right now less than 1/4 of the slots have seeds. It wont look like much to start, but as we hit April and May, there will be a lot of plant growth.

On a side note, as many of you know, we have next to no storage space in our house. Our laundry room is full of shelving and that takes up much of the room in there. Well the seed starter is sitting on the top shelf. Above it is my grow light, plants love light. However, on the floor is my beer in the secondary fermenter, beer hates light. Light will make beer taste skunky and gross. Thats why most of it is in brown bottles. So you see my dilemma here. Plants need light, beer hates light. Thankfully I can just wrap a towel around the fermenter to protect it from the 16 hrs of light the plants are getting...





Posted by ShoZu